All Categories

Home > BLOG > 6082 aluminum alloy, aluminum alloy 6082 and 6061-t4 What is the difference

6082 aluminum alloy, aluminum alloy 6082 and 6061-t4 What is the difference

August 28,2023

What is the difference between T4 aluminum alloy there are many series.6082 and 6061 belong to the 6 series alloy (silicon magnesium alloy), -1, the main alloying element is magnesium and silicon, the main alloying element is magnesium and silicon, 6061 aluminum alloy the main alloying element is magnesium and silicon, forming Mg2Si phase.

2.1


6082 aluminum sheet hardness

[hardness 6082] After extrusion quenching and artificial aging, the Vickers hardness is 16Hw; HBS≥80.[6082] It is a heat-treatable aluminum-magnesia silicon alloy with good extrusion forging properties, good anodic oxidation and corrosion resistance. 6082HBS≥80; After extrusion quenching and artificial aging; 6061≥95. Suitable for the manufacture of aircraft landing pad, ships, building components, bicycles, auto parts, optical instruments, rail vehicle aluminum and so on. 6082 has many of the same uses as 6061

extruded aluminum alloy pipe 6082-t6 is what material

The chemical composition of 6082 is; Si0.7 ~ 1.3Fe0.50Cu0.10Mn0.40 ~ 1.0Mg0.6 ~ 1.2Cr0.25Zn0.2Ti0.106082 is a heat-treatable alloy with good formability, weldability, workability and medium strength, and can still maintain good maneuverability after annealing. Mainly used in mechanical structures, including bars, plates, pipes and profiles. This alloy has similar but not identical mechanical properties to alloy 6061.

It is also widely used in the United States for processing raw materials, seamless aluminum tubes, structural profiles and custom profiles. 6082 alloy usually has good processing characteristics and good anode reaction performance. The most common anodic reaction methods are impurity removal, impurity removal, dyeing, coating and so on. The 6082 combines excellent weldability, brazing, etc. Formability and machinability. The 0 and T4 states of alloy 6082 are suitable for bending and forming, and the T5 and T6 states are suitable for good machinability.

aluminum alloy 6061 and 6063 and 6082 what is the difference?

1. The content of alloying elements is different. 6061 contains more alloying elements than 6063. 2. Different alloy elements. The main alloying elements are magnesium and silicon. It has excellent processing properties, excellent weldability, extrusion and electroplating properties, good corrosion resistance and toughness. It is a typical extrusion alloy, easy to polish, coating, and excellent anodizing effect. The main alloying elements of 6061 aluminum alloy are magnesium and silicon, forming Mg2Si phase. 3. Different performance. 6061 requires industrial structural parts to have a certain strength, weldability and high corrosion resistance.

2.2

Different oxidation properties.

6061 oxidation performance is general, 6063 oxidation performance is better. 5. Different plasticity. 6061 plasticity is normal, 6063 plasticity is good. Abstract: The difference between aluminum alloy 6063 and 6061 [problem]1. The content of alloying elements is different. 6061 contains more alloying elements than 6063. 2. Different alloy elements. The main alloying elements are magnesium and silicon. It has excellent processing properties, excellent weldability, extrusion and electroplating properties, good corrosion resistance and toughness.

6082 aluminum alloy surface treatment

Hot categories